Hanna-instruments HI 9033 User Manual download pdf (Page 8)

1514

The meters are supplied with the ad-

vanced BEPS (Battery Error Prevention

System) technology, which detects a low

battery condition and warn the user by

displaying the "V" symbol.

When the low battery indicator appears, the battery can support

approximately 5 hours of use.

When the battery level becomes too low to ensure reliable readings,

the instrument automatically shuts off.

Battery replacement must only take place in a safe area and using a

9V alkaline battery.

To replace the rundown battery, remove

the two screws on the rear cover of the

instrument and replace the battery with

a new one, while paying attention to

the correct polarity.

After battery replacement, always

recalibrate the meter.

BATTERY REPLACEMENT

After evry series of measure-

ments, rinse the probe with

tap water.

If a more thorough cleaning

is required, remove the PVC

sleeve and clean the probe

with a cloth or a nonabra-

sive detergent.

When reinserting the sleeve

onto the probe, be sure that

the sleeve is in the right

direction with the four holes

towards the cable end.

After cleaning the probe,

always re-calibrate the

instrument.

The probe body is made of

PVC. For this reason it must

never come into close con-

tact with a heat source. If

the probe is exposed to high

temperatures, the rings

might become loose or de-

tached, resulting in a serious

impairment of probe func-

tioning. In such cases, probe

needs to be replaced.

PROBE MAINTENANCE

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Hanna-instruments HI 9033 User Manual Page 8

Comments to this Manuals

Related products and manuals for Sensors Hanna-instruments HI 9033