Hanna-instruments HI 86301 User Manual download pdf

WARRANTY

These instruments are guaranteed for two years against

defects in workmanship and materials when used for their

intended purpose and maintained according to instructions.

Probes are guaranteed for six months. This warranty is

limited to repair or replacement free of charge. Damages due to

accidents, misuse, tampering or lack of prescribed maintenance

are not covered. If service is required, contact the dealer from

whom you purchased the instrument. If under warranty, report

the model number, date of purchase, serial number and the

nature of the failure. If the repair is not covered by the

warranty, you will be notified of the charges incurred. If the

instrument is to be returned to Hanna Instruments, first obtain

a Returned Goods Authorization Number from the Customer

Service department and then send it with shipment costs

prepaid. When shipping any instrument, make sure it is

properly packaged for complete protection.

All rights are reserved. Reproduction in whole or in part is prohibited

without the written consent of the copyright owner, Hanna Instruments.

Dear Customer,

Thank you for choosing a Hanna product.

Please read carefully this instruction manual before using the

meter. If you need additional technical information, do not

hesitate to e-mail us at [email protected].

These instruments are in compliance with the directives.

PRELIMINARY EXAMINATION

Remove the instrument from the packing material and examine

it carefully. If any damage has occurred during shipment,

immediately notify your Dealer or the nearest Hanna Customer

Service Center.

Each meter is supplied with:

• Conductivity probe

• HI 7634D/1 for HI 86301 and HI 86303

• HI 7632D/1 for HI 86302 and HI 86304

• Calibration solution sachet (20 mL)

• HI 70031 (1413 μS/cm) for HI 86303

• HI 70039 (5.00 mS/cm) for HI 86304

• HI 70032 (1382 ppm) for HI 86301 & HI 86302

• Battery, screwdriver & instructions

Note: Conserve all packing material until the instrument has

been observed to function correctly. Any defective item

must be returned in its original packing.

GENERAL DESCRIPTION

These EC and TDS portable meters have been designed for

simplicity of use, and provide accurate measurements.

Readings are automatically compensated for temperature varia-

tions, and the calibration is manually performed at one point

through trimmer.

The BEPS (Battery Error Prevention System) automatically

switches the meter off when the battery level is too low to

ensure reliable readings.

The housing has been completely sealed against humidity, for

use in any type of environment.

The probe is easy to clean and requires little maintenance.

Choose the model with the measurement range that best fits

your application:

• HI 86301 reads TDS from 0 to 1999 ppm (mg/L)

• HI 86302 reads TDS from 0.00 to 10.00 ppt (g/L)

• HI 86303 reads EC from 0 to 1999 μS/cm

• HI 86304 reads EC from 0.00 to 19.99 mS/cm

SPECIFICATIONS

Hanna Instruments reserves the right to modify the design,

construction and appearance of its products without advance notice.

EC Models

HI 86303 HI 86304

Range 0 to 1999 μS/cm 0.00 to 19.99 mS/cm

Resolution 1 μS/cm 0.01 mS/cm

Accuracy ±2% f.s

Calibration Manual, 1 point,

through trimmer in the battery compartment

Probe (included) HI 7634D/1 HI 7632D/1

Temp.Compensation Automatic, 0 to 50°C (32 to 122°F)

with β=2%/°C

Environment 0 to 50 °C (32 to 122°F); RH max 100%

Battery Type 1 x 9V alkaline

Battery Life Approx. 300 hours Approx. 150 hours

Dimensions 164 x 76 x 45 mm (6.4 x 3.0 x 1.8’’)

Weight 250 g (8.8 oz.)

TDS Models

HI 86301 HI 86302

Range 0 to 1999 ppm 0.00 to 10.00 ppt

Resolution 1 ppm 0.01 ppt

Accuracy ±2% f.s

Calibration Manual, 1 point,

through trimmer in the battery compartment

Probe (included) HI 7634D/1 HI 7632D/1

Temp.Compensation Automatic, 0 to 50°C (32 to 122°F)

with β=2%/°C

Environment 0 to 50 °C (32 to 122°F); RH max 100%

Battery Type 1 x 9V alkaline

Battery Life Approx. 300 hours Approx. 150 hours

Dimensions 164 x 76 x 45 mm (6.4 x 3.0 x 1.8’’)

Weight 250 g (8.8 oz.)

www.hannainst.com

Instruction Manual

HI 86301 • HI 86302

HI 86303 • HI 86304

TDS and EC Meters

1 2

Summary of Contents

Page 1 - TDS and EC Meters

WARRANTYThese instruments are guaranteed for two years againstdefects in workmanship and materials when used for theirintended purpose and maintained

Page 2 - IST86301 05/05

ACCESSORIESHI 7632D/1 Conductivity probe, HR, with built-in tempera-ture sensor, DIN connector and 1 m (3.3’) cableHI 7634D/1 Conductivity probe, LR,

Related models: HI 86302 | HI 86304 |

Comments to this Manuals

No comments

Hanna-instruments HI 86301 User Manual

Browse online or download User Manual for Sensors Hanna-instruments HI 86301. Hanna Instruments HI 86301 User Manual

Summary of Contents

Related models: HI 86302 | HI 86304 |

Comments to this Manuals

Related products and manuals for Sensors Hanna-instruments HI 86301