Hanna-instruments HI 9813-5 User Manual

1Instruction ManualHI 9813-5 & HI 9813-6PortablepH/EC/TDS/°C Meterswww.hannainst.com

10PMET SEULAVHpCº Fº 10.4 68.6 10.7 81.9 10.010 23 10.4 89.6 31.7 64.9 23.015 14 00.4 59.6 01.7 93.9 42.0101 05 00.4 29.6 70.7 33.9 81.0151 95 00.4 09

11Accessories needed:• Use HI 70031 (1413 µS/cm = 1.413 mS/cm) EC calibrationsolution or HI 70442 (1500 ppm) TDS calibration solution.Note: The conver

12PROBE MAINTENANCEPROBE MAINTENANCEPROBE MAINTENANCEPROBE MAINTENANCEPROBE MAINTENANCEThese meters are powered by a 9V battery that is located on the

13CLEANING PROCEDUREFor better accuracy in measurements and to ensure a good performanceof the probe, a frequent cleaning is recommended.For this purp

14PROBESHI 1285-5 Combination, amplified pH/EC/TDS/temperature probewith built-in temperature sensor, 8-pin DIN connectorand 1 m (3.3') cableHI 1

15Hanna Instruments reserves the right to modify the design, construction andappearance of its products without advance notice.RECOMMENDATIONS FOR USE

16Printed in EUROPE(ROMANIA) MAN9813 09/10Hanna Instruments Inc.Highland Industrial Park584 Park East DriveWoonsocket, RI 02895 USATechnical Support

2Dear Customer,Thank you for choosing a Hanna product.Please read this instruction manual carefully before using the meter.This manual will provide yo

3HI 9813-5 and HI 9813-6 are complete, versatile and splash-proofportable combination meters designed with the utmost precision andsimplicity. Both mo

41) 8-pin DIN connector for probe2) Liquid Crystal Display3) pH range selection key4) mS/cm (EC) range selection key5) ppm (TDS) selection key6) pH of

51) 8-pin DIN connector for probe2) Liquid Crystal Display3) pH range selection key4) mS/cm (EC) range selection key5) ppm (TDS) range selection key6)

6egnaRHp0.41ot0.0mc/Sm00.4ot00.0mpp9991ot0C°0.06ot0.0noituloseRHp1.0mc/Sm10.0mpp1C°1.0ycaruccA)F°86/C°02@(Hp1.0±mc/Sm.s.f%2±mpp.s.f%2±C°5.0±noitaiveDC

7INITIAL PREPARATIONEach meter is supplied complete with a 9V battery. Remove thebattery compartment cover on the back of the meter and install thebat

8• Select the appropriate measurement range (EC or TDS).• Wait for a couple of minutes for thetemperature sensor to reach thermalequilibrium. The disp

9For greatest accuracy, frequent calibration of the instrument isrecommended. The instrument should be recalibrated for pH:a) Whenever the electrode i